Optional

Telescope.GuideRateRightAscension Property

Telescope.GuideRateRightAscension (read-write, Double)

The current Right Ascension movement rate offset for telescope guiding (degrees/sec)

Syntax

Telescope.GuideRateRightAscension [= Double]

The property syntax has these parts:

Part	Description
Value (Double)	The current Right Ascension movement rate offset for telescope guiding (degrees/sec)

This is the rate for both hardware/relay guiding and the PulseGuide() method.

NOTES:

To discover whether this feature is supported, test the CanSetGuideRates property.
The supported range of this property is telescope specific, however, if this feature is supported, it can be expected that the range is sufficient to allow correction of guiding errors caused by moderate misalignment and periodic error.
If a telescope does not support separate guiding rates in Right Ascension and Declination, then it is permissible for GuideRateRightAscension and GuideRateDeclination to be tied together. In this case, changing one of the two properties will cause a change in the other.
Mounts must start up with a known or default right ascension guide rate, and this property must return that known/default guide rate until changed.