Stops a slew in progress.

Invokes the specified device-specific action.

Determine the rates at which the telescope may be moved about the specified axis by the MoveAxis(TelescopeAxes, Double) method.

True if this telescope can move the requested axis

Transmits an arbitrary string to the device and does not wait for a response. Optionally, protocol framing characters may be added to the string before transmission.

Transmits an arbitrary string to the device and waits for a boolean response. Optionally, protocol framing characters may be added to the string before transmission.

Transmits an arbitrary string to the device and waits for a string response. Optionally, protocol framing characters may be added to the string before transmission.

Predict side of pier for German equatorial mounts

Dispose the late-bound interface, if needed. Will release it via COM if it is a COM object, else if native .NET will just dereference it for GC.

Locates the telescope's "home" position (synchronous)

Move the telescope in one axis at the given rate.

Move the telescope to its park position, stop all motion (or restrict to a small safe range), and set AtPark to True.

Moves the scope in the given direction for the given interval or time at the rate given by the corresponding guide rate property

Sets the telescope's park position to be its current position.

Launches a configuration dialog box for the driver. The call will not return until the user clicks OK or cancel manually.

Move the telescope to the given local horizontal coordinates, return when slew is complete

This Method must be implemented if CanSlewAltAzAsync returns True.

Move the telescope to the given equatorial coordinates, return when slew is complete

Move the telescope to the given equatorial coordinates, return immediately after starting the slew.

Move the telescope to the TargetRightAscension and TargetDeclination coordinates, return when slew complete.

Move the telescope to the TargetRightAscension and TargetDeclination coordinates, returns immediately after starting the slew.

Matches the scope's local horizontal coordinates to the given local horizontal coordinates.

Matches the scope's equatorial coordinates to the given equatorial coordinates.

Matches the scope's equatorial coordinates to the given equatorial coordinates.

Takes telescope out of the Parked state.